| Alimentation |
| Alimentation fournie |
350 Watt |
| Alimentation redondante |
En option |
| Nombre max. pris en charge |
2 |
| Périphérique d'alimentation |
Alimentation électrique interne - enfichable à chaud |
| Tension requise |
CA 120/230 V (50/60 Hz) |
| Caractéristiques d’environnement |
| Taux d'humidité en fonctionnement |
5 - 95 % (sans condensation) |
| Température maximale de fonctionnement |
45 °C |
| Température minimale de fonctionnement |
-5 °C |
| Divers |
| Normes de conformité |
CISPR 22 classe A, CISPR 24, EN 61000-3-3, EN55024, EN 55022 classe A, AS/NZS 60950-1, ICES-003 classe A, FCC CFR47 Part 15, UL 60950-1 Second Edition, CAN/CSA C22.2 No. 60950-1, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2004/108/CE, Directive 2006/95/EC, VCCI Class A, KN24, KN22 Class A, EN 61000-3-12:2011, AS/NZS CISPR22:2006 Class A |
| Extension/connectivité |
| Interfaces |
1 x gestion - RJ-45 ¦ 1 x 1000Base-T (gestion) - RJ-45 ¦ 1 x management (USB) - Type B ¦ 2 x USB - Type A ¦ 6 x 10Gb Ethernet - SFP+ |
| Garantie du fabricant |
| Service et maintenance |
Garantie limitée - 90 jours |
| Général |
| Hauteur |
4.45 cm |
| Hauteur (unités de rack) |
1U |
| Largeur |
44.5 cm |
| Profondeur |
45 cm |
| Type de périphérique |
Périphérique d'administration réseau |
| Réseaux |
| Algorithme de chiffrement |
DES, Triple DES, SHA, RC4, MD5, AES, IKE, SSL, TLS 1.0, TKIP, WPA, WPA2, PKI, AES-CCMP, AES-CCM, AES-CBC, DTLS, 1024-bit RSA, 2048-bit RSA, TLS 1.1, WEP |
| Capacité |
Points d'accès administrables: 100 |
| Caractéristiques |
Compatible DHCP, prise en charge de BOOTP, prise en charge d'ARP, prise en charge de Syslog, administrable, prise en charge d'IPv6, inspection approfondie, mode duplex intégral, prise en charge du protocole SNTP, Stateful switchover (SSO), prise en charge de Wi-Fi Multimedia (WMM), assistance Trivial File Transfer Protocol (TFTP), assistance Access Control List (ACL), qualité de service (QDS), support RADIUS, technologie Cisco StackWise, technologie CleanAir, NetFlow, prise en charge CAPWAP, base d'information de gestion (MIB), technologie Cisco VideoStream, authentification 802.1x, technologie ClientLink 3.0 |
| Format |
Externe |
| Indicateurs d'état |
Alimentation, système, active, liaison/activité |
| Méthode d'authentification |
Secure Shell (SSH), RADIUS, certificats X.509, SSID (Radio Service Set ID), TACACS, protocole d'authentification extensible (EAP) |
| Nombre de ports |
6 |
| Normes de conformité |
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.3x, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11e, IEEE 802.11n, IEEE 802.11k, IEEE 802.1AX, IEEE 802.11ac |
| Protocole de commutation |
Ethernet |
| Protocole de gestion à distance |
SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, CLI |
| Protocole de liaison de données |
Ethernet, Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet |
| Protocole de Routage |
CIDR |
| Protocole réseau / transport |
TCP/IP, UDP/IP, ICMP/IP, IPSec, ARP, BOOTP, DHCP |
| Technologie de connectivité |
Filaire |